EM6422 PULSE EMITTER

EM6422 pulse emitter is a leakproof pulse emitter designed to connect PD meters to flow computers. It has a special magnetic drive leakproof connection to permitaremoval of the electronic card without any spill of product.

CALIBRATION CENTRE

This company Law n°273, which has established the National Calibration System (SNT), has also defined the approval’s methods for italian metrological laboratories (SIT Centres). Experts of Primary Metrological Institutes perform programs of preliminary qualification and procedures of first accreditation, of maintenance, of renewal, of extension or modification of the approval in order to qualify and accreditate the laboratory as a Calibration Center.

 



LFD6 LARGE DIGITAL DISPLAY

The LFD-6 remote display unit has been mainly for use on hydrant dispensers refuellers working at airports.

This application requires the volume measured by PD meter be repeated and easily read from a reasonable distance within the working area.

BM 3" 4" AND 6" CARBON STEEL

PD meter series BM sizes 2”, 3”, 4” and 6” offers high accuracy: +/- 0,1% with a repeatability of +/- 0,01%, over a large range of flow rate. This accuracy remains constant during long periods of use.
Visual indication of the flow rate measured can be obtained when associated with mechanical register or electronic flow computer directly mounted on the meter or remote by means of a pulses emitter (see VEGA II or VEGA T leaflets).

MASTER METER

Master Meter is a dedicated P.D.meter used to calibrate other meters.

These meters are typically used by the petrochemical industry for the calibration of PD meters in truck loading bays, pipeline meters for the transfer of products from refineries to terminal and the calibration of tank truck meters.

Master Meter can be mounted on trolley with all necessary equipment to be connected to other P. D. meters for calibration.
Until now the usual way of proving positive displacement meters is by means proving tanks With the Master Meter the calibration operation time is reduced by half using a single operator/calibration engineer to carry out the meter calibration.



PROVING TANKS

Proving tanks are used for calibrating custody transfer PD meters, dosing pump, tanks ecc.

Carbon steel construction  Inox.
Plexiglas graduated scale applied to the top neck by
sealed screws.
Bottom level sight glass.
Ball bottom valve.
Loading tube.
Livelling bubble.
Adjustable displacement pluger.
External epoxy painting for carbon steel.
Eyebolts for lifting.

LAT laboratory certificate on request

For more details see specific documentation.



MT 30 GROUNDING UNIT

The electronic grounding unit MT30 allows safe loading and unloading of mobile tanks (mounted on trucks, wagons or trolleys and also big bags) in which flammable substances are poured at high speed generating electrostatic charges that can cause sparks and explosions.



VEGA II

The VEGA II electronic counter is compatible with almost any type of flow meter, it is an instrument for handling the measurement, the control and automation of liquid products.
Typical applications include tank truck, rail car or barge loading at bulk petrochemical plants, custody transfer applications and truck deliveries. This company has over twenty year’s experience manufacturing electronic counters and measuring systems, the new VEGA II is the result.



VEGA T

This company announces the new electronic register VEGA T, years of experience in the design and manufacture of electronic equipment for the downstream petrochemical industry have resulted in the design of this innovative, new product.



ISE CONTROL VALVE 3" AND 4"

One of the main features of the ISE automatic valve is that it uses the pressure of the fluid passing through it, to perform the functions which it has been designed for. The valve shutter is driven by the movement of the diaphragm, actuated through the energy of the process.



SBM 2" AND 3" ALLUMINIUM

PD meter series SBM sizes 2”and 3” offers high accuracy: +/- 0,1% (SBM 150) and +/- 0,15% (SBM 75) with a repeatability better than +/- 0,02%, over a large range of flow rate. This accuracy remains constant during long periods of use. Visual indication of the flow rate measured can be obtained when associated with mechanical register or electronic flow computer directly mounted on the meter or remote by means of a pulses emitter (see VEGA II or VEGA T leaflets).



ISOVALVE 6" 8" AND 10"

One of the main features of the ISOVALVE automatic valve is that it uses the pressure of the fluid passing through it, to perform the functions which it has been designed for. The valve shutter is driven by the movement of the diaphragm, actuated through the energy of the process.



DOUBLE BLOCK & BLEED VALVE

The double seal valve for “fiscal” control, is made by an external body with flanged connections and by an internal spherical shutter. While closing, the shutter causes a pressure on two parabolic/cylindrical shape seal rings guaranteeing a progressive deceleration of the fluid up to the his complete interception.



PIGS

Pigging system technology:

We have a huge range of industrial solutions focused on maintenance and interior pipes cleaning. We deal and make projects with KIESEL products, best tech to offer you the best solution with complete guarantee.



COMPACT SFDA STRAINER AIR ELIMINATOR

COMPACT SFDA STRAINER AIR ELIMINATOR



DRY DISCONNECT

All the possible systems in dry couplings : Epsilon, Kamvalok and Drylok, Todo-matic, Drydis and all the accessories for a whole closed solution in fluid conduction.



GASSOFLEX

Fittings for all types of hoses, composite hoses, rubber hoses, plastic hoses, Teflon hoses.

it's extensive range of fittings, either of own production such as the distribution of others.

Fittings type Barcelona, KAMLOK, GUILLEMIN, TW, STORZ, BAUR, DIN 28450 safety clamps.

Qualities: Aluminum, bronze, brass, stainless steel, PVC, coated Teflon.

 

All the Types

Fittings type Barcelona, KAMLOK, GUILLEMIN, TW, STORZ, BAUR, DIN 28450 safety clamps. 

Materials

Gassó, has fittings in aluminum, brass, bronze, PVC, PTFE, galvanized steel, 
stainless steel.

Applications

for the chemical, food, of the oil, pharmaceutical, cement, mining, high pressure cleaning.

Service

We have enough stock in our warehouse for deliveries very fast to any of the existent types.

 



STAINLESS STEEL METERS FROM 2" TO 6"

PD meter series SBM 75 MK2 and BMX and sizes 2”, 3”, 4” and 6” offers high accuracy: +/- 0,1% (BMX) and +/-0,15% (SBM 75 MK2) with a repeatability better than +/- 0,02%, over a large range of flow rate.

This accuracy remains constant during long periods of use.

Visual indication of the flow rate measured can be obtained when associated with mechanical register or electronic flow computer directly mounted on the meter or remote by means of a pulses emitter (see VEGA II or VEGA T). Stainless steel construction guarantees compatibility with aggressive liquids.

 



LBM 8" AND 10" DOUBLE CASE

PD meter series LBM sizes 8” and 10” offers high accuracy: +/- 0,1% with a repeatability of +/- 0,01%, over a large range of flow rate. This accuracy remains constant during long periods of use.
Visual indication of the flow rate measured can be obtained when associated with mechanical register or electronic flow computer directly mounted on the meter or remote by means of a pulses emitter (see VEGA II or VEGA T leaflets).
Stainless steel construction guarantees compatibility with aggressive liquids.

 



GRAVITY BULKMETER S9000

The S9000 bulkmeter has been particularly studied to be mounted on tank-trucks carrying petrol and chemical products. Using the S9000 bulkmeter the liquid can be unloaded in underground containers by gravity without the aid of a pump.



BMV METERING GROUP 3" 4" AND 6"

PD meter series BMV sizes 3”, 4” and 6” offers high accuracy: +/- 0,1% with a repeatibility of +/- 0,01%, over a large range of flow rate. This accuracy remains constant during long periods of use. Visual indication of the flow rate measured can be obtained when associated with mechanical register or electronic flow computer directly mounted on the meter or remote by means of a pulses emitter (see VEGA II or VEGA T leaflets).



STAINLESS STEEL

Flexible stainless steel hoses are tubes of great flexibility and very high resistance against the pressures, corrosion chemistry inside and front abrasion exterior; this is possible thanks to the combination of two flexible constructive elements and stainless steel: a corrugated inner tube and an outer braid.

Manufactured and assembly

We introduce you to your hose INOX manufactured and assembled entirely in its plant for the manufacture and Assembly of hose Inox from 6 mm to 200 mm in diameter and up to 100 meters length rolls.

Manufacturing with exclusive technology and with a higher quality than the existing products on the market.

Inox truck tank or tank to tank by hose is a hose for shipping products.

 

Production

Manufacturing processes and methods of production of new generation, as well as proper equipment with the latest technical innovations, they ensure a production of high quality and high productivity.

Custom assemblies

The construction and Assembly of these flexible is done with assemblies of standard accessories I under plane respecting and accepting each customer-specific designs.

Light and resistant

Light but resistant to the pressure because in its construction of parallel waves of strong step with great flexibility and high vibration absorption.

Construction

AISI stainless steel AISI 321 with braid of protection in stainless steel AISI 304 or 316 L wire 1.5 mm.

 

Quality

Inox is according : ISO 9001:2000,manufactured tube ISO 10.380/1 BS 6501/1991.B

 



TECHNICAL HOSES

Hoses in rubber or plastic for all kinds of fluids:

Water/Air, Petroleum, Steam hot water, LPG, transfer coolant, shot blast,abrasion resistant, food quality, chemical.   

Distributed:

We give your rubber and PVC hoses manufactured from 12 to 16".

Large stock of all hoses and sizes, manufactured with the most advanced technology, exclusive and with a higher quality than the existing products on the market.

  

Multipurpose

Rubber and plastics hoses are for a differents applications, having a great potential for combination of different types of rubber, NBR, SBR, CR, HR, CSM, EPDM, XLPE.

Flexibility

The construction of embedded tissues as well as the reinforcements of helical wire and rubber, gives hoses great flexibility.

Light and Resistant

Light but pressure resistant, compact and robust, all hoses depending on its use are manufactured with the most suitable material.

Customizable

All hoses can be customized with the name of the customer or with different names depending on the needs.

 

Quality:

Rubber hoses  are according differented norms: ISO 9001:2000, EN 13765, BS 5842, BS 3491, PED 97/23/CE, IMO CODES.

 



TANK TRUCK EQUIPMENT

MANUFACTURING:

Equiptank Engineering has the most modern production systems available in order to offer a product that is manufactured following the highest quality standards.

Our Technical Department constantly designs and develops new products, which allow us to offer new solutions to our clients.

RANGE OF PRODUCTS

The EQUIPTANK brand includes a complete range of equipment and accessories for the transportation of dangerous goods, dry bulk and all types of liquids in general.

The PRECINTAK brand includes our range of electronic seal systems.

APPLICATION

Besides the EQUIPTANK standard range of products, our Technical Department develops specific solutions to fit our client's needs.

EQUIPTANK ENGINEERING provides a security bonus in fuel logistics, as our priority is to design and develop functional products that comply with the highest safety and quality standards required by the market.

Other EQUIPTANK products are used for transportation of chemical, food and dry bulk products.

Our products are designed and developed following the international regulations.

 



BMD DOUBLE CASE 2" 3" 4" AND 6"

PD meter series BMD sizes 2”, 3”, 4” and 6” offers high accuracy: +/- 0,1% (BMD) and +/- 0,15% (SBMD) with a repeatability better than +/- 0,02%, over a large range of flow rate. This accuracy remains constant during long periods of use. Visual indication of the flow rate measured can be obtained when associated with mechanical register or electronic flow computer directly mounted on the meter or remote by means of a pulses emitter (see VEGA II or VEGA T leaflets). Double case PD meters are suitable for a large range of pressure.



PRECINTANK

Precintank is a loading and in loading monitoring unit, that allows for load control during the complete process of transport and delivery of petroleum products.The systems works separately from the normal operation of the tank truck, this never interfering with it, and can be installed in tankers of one to ten compartment.

Safety Features

  • Cargo control during transportation, quantity and quality wise.
  • Work safety: avoids worker from having to climb to the top part of the tanker to verify existing fuel level.
  • VOC emissions:avoid emissions of environmentally hazardous particles to the atmosphere due to unauthorized openings.
  • Detection of retained product in the pipes ans compartments.

Cargo Control

  • Avids theft amn manipulation of the product transported by monitoring the sensors placed at all the possible openings of the tanker.
  • All sensors used are namur type (which allows to see if the sensor is open, closed or shortcircuited).
  • API valve sensor: The movement sensor detects opening and closing of the valve. Sensitivity is adjustable.
  • The wet sensor detects the existence of product inside the pipes and/or inside the compartments.
  • Bottom valve sensor; internally fitted to avoid tampering. Sensor detects opening and closing of the valve.
  • Pressure relieve cap sensor: detects opening (optional).
  • Manhole cover sensor: detects opening and colsing.
Features
  • Bluetooth wireless module for data unloading.
  • Rechargable Lithium Ion battery. 72 H battery life.
  • Internal power source to feed the whole system in intrinsic security and to safely recharge the battery.      Ex II2(1)G e mb EX ib(ia) IIA T4 Certification
  • Graphic LCD screen with back light.
  • Display can be configured tosuit the client's requirements.
  • 2 GB to 4 GB internal memory for registration and storage of events.
  • Precitank software for HP iPAQ Pocket PC type - Tablet (Android).
  • GPS location module.
  • GPRS transmission module.
  • System developed in accordance with the directives of european regulation EN 15208:2009 for electronic seals.

 



LPG TRUCK SYSTEM

LPG truck system Specif ically studied for the LPG truck, they offer huge advantages like:
• simplicity of installation
• compact size
• low mounting cost
• safety in unloading operation
• automatically air elimination

PTFE COVOLUTED

No hose delivers more performance than the PTFE global benefits. Resistance to chemical aggression is unbeatable. PTFE is mechanically tough, but on the other hand, spiral-shaped is much more flexible. The PTFE material is tested for high and low temperatures. They are made to measure with the required specifications made of 15 mm up to 150 mm.

 

 Corroflon Hose Assemblies

Corroflon is custom built to individual order and is supplied in the form of finished hose assemblies after the length, liner, braid, and end fittings have been decided upon.

Selecting the Hose Grade

The basic grade of corroflon is corroflon GP, SS in many cases. A hose grade is specified by using the abbreviations.

Selecting the end fittings

Corroflon is available with a range of standard end fittings, both integrally PTFE lined an non-lined.

Corroflon Hose lengths

Corroflon hose assemblies are made up to the specific lengths required. The hose length is taken as the length from the sealing face af one end of the hose to the same at the other end.

 

Quality Assurance Registrations

corroflon Hose are manufactured to BS EN ISO 9001:2000

 



COUPLING

Fittings for all types of hoses, composite hoses, rubber hoses, plastic hoses, Teflon hoses.
Qualities: Aluminum, bronze, brass, stainless steel, PVC, coated Teflon. 

 All the Types

Fittings type Barcelona, KAMLOK, GUILLEMIN, TW, STORZ, BAUR, DIN 28450 safety clamps 

 

Materials

It has fittings in aluminum, brass, bronze, PVC, PTFE, galvanized steel, stainless steel

 

 

Applications

for the chemical, food, of the oil, pharmaceutical, cement, mining, high pressure cleaning

Service

We have enough stock in our warehouse for deliveries very fast to any of the existent types

 

 



LOADING ARM

Manufacture of all kinds of loading arms in aluminum, steel, stainless steel, as well as stairs and platforms.

Stairs are the last step before completing a project of loading arms, a good ladder promotes a safe and accident-free charging.

Manufacture of structures, platforms and canopies.

Loading arms are manufactured and distributed and all its accessories and spare parts for them, with a double service ranging from the design of the solution to the maintenance.

 

Custom design

 Our experience has show that loading arms should always be adapted to a previously made design.For this reason stating with a basic configurations, our custom designs their products, type of loading arm, measurements, swivel joints, etc..

 

Short delivery

After a project is accepted our own department of design direct and supervises manufacturing. This enables meeting dead lines without
affecting quality

Maintenance

Before and after a loading arm, there are many other components that affect the life of the device.It offers an"on Site" service with several mobiles vans and repair customer's loading arms problems

Customized

All of loading arms, stair, platforms, canopies are manufactured according the customer specifications

 

International Quality

Loading arms aremanufactured  and stairs in accordance with the highest standards: ISO 9001: 2000, design, installation and maintenance of Loading arms: top loading, vapour recovery, charging lower hose, 1 liquid phase bottom-loading, bottom 2 stages liquid-gas, Swivel, stairs, Design, Installation and Maintenance of Loading Arms: Toploaders, with Recovery Vapors, Bottom loader, Twin (Gas and Liquid phases) Swivel-Joins, Folding Stairs, Platforms.

 



SBM32 1" 1/2

PD meter series SBM32 sizes 1 ½”offers high accuracy: +/- 0,2% (SBM 150) and with a repeatibility better than +/- 0,04%, over a large range of flow rate. This accuracy remains constant during long periods of use. Visual indication of the flow rate measured can be obtained when associated with mechanical register or electronic flow computer directly mounted on the meter or remote by means of a pulses emitter (see VEGA II or VEGA T leaflets).



 

www.zoil-int.com

info@zoil-int.com

JoomShaper